Your position: Home > News

RMC Plant For Sale


Concrete batching plant manufacturers regard quality of rmc plant as their life and win customers with reputation. The company's products are the first in the industry to pass 9001:2008 quality management system certification and EU CE certification. Concrete mixers are included in the list of recommended products by the Construction Machinery Association. If you want to build a ready mix concrete plant equipment with freight, what knowledge should you know?


rmc plant rmc plants


The rmc plant manufacturers silo includes the mixing of powdered materials when blowing into the silo, the mixing of sand and stone, and the mixing of different types of sand and gravel. The prevention method: the silo's identification must be clear and accurate, and each soot blowing port of ready mix concrete plant must be marked with a special mark, and each soot blowing port must be locked, and when the powder comes in, the materials department's receiving personnel will unload the material. Different types of raw materials must be classified and stacked in different locations.

The cement silo of the ready mix concrete plant equipment is mostly cylindrical, and the whole silo is supported by four circular pipe legs at the bottom, and the entire silo is welded by steel. The bottom part is equipped with a dust collector and a pressure safety valve to prevent dust leakage; there is an arch breaking device at the bottom to prevent dust from agglomerating. The cement silo is generally used as a supporting product of a ready mix concrete plant. It has the characteristics of rainproof, moisture-proof and easy to use. The specifications and dimensions of the cement silo product can be made according to the requirements of customers.

When the pressure of the air compressor of the rmc plant rises slowly and is accompanied by oil leakage, it indicates that the piston ring of the air compressor has been severely worn and should be replaced in time. When the intake valve is damaged or the air filter is blocked, the pressure of the air compressor will rise slowly (but there is no oil leakage). During inspection, you can put your palm on the air inlet of the air filter. If there is hot air coming out, it means that the air inlet valve is damaged and needs to be replaced. If the suction force is small, the air filter is generally dirty and should be replaced or clean the filter.